[Linux-HA] CRM

[Dejan Muhamedagic]

On Wed, Jul 08, 2009 at 02:07:31AM -0600, Bret Palsson wrote:
> All was done in reference to http://clusterlabs.org/mediawiki/images/8/8d/Crm_cli.pdf 
>     pages 3 and 4.
> 
> When pasting the following I get errors. However if I enter the crm  
> and paste line by line I don't get errors and everything works dandy.  
> Any suggestions on how I can "script" this configuration?
> 
> I've also tried: crm configure show > backup  (Obviously after having  
> a valid configuration to backup)
> 
> and then pasted the contents of the backup after the erase command  
> below. That didn't work either.
> 
> crm<<EOF
> configure
> erase
> primitive virtual_ip ocf:heartbeat:IPaddr2 operations $id="virtual_ip- 
> operations" op monitor interval="10s" timeout="20s" start-delay="5s"  
> params ip="10.130.0.5" nic="eth0" cidr_netmask="16" meta  
> $id="virtual_ip-meta_attributes"
> primitive pgpool-ha ocf:pacemaker:pgpoolha operations $id="pgpool-ha- 
> operations" op monitor interval="10" timeout="20" start-delay="0"  
> params pgpool="/usr/bin/pgpool" pgpoolconf="/etc/pgpool.conf"  
> pcpconf="/etc/pcp.conf" pool_hbaconf="/etc/pool_hba.conf"  
> forcestop="10" meta $id="pgpool-ha-meta_attributes"
> primitive citrix-stonith stonith:external/citrix-xenserver operations  
> $id="citrix-stonith-operations" op monitor interval="15" timeout="15"  
> start-delay="15" params  
> hostlist 
> = 
> "dbcontroller1 
> .net:dbcontroller1.master,dbcontroller2.net:dbcontroller2.master"  
> poolMaster="10.128.250.1" poolMasterUserName="root"  
> poolMasterPassword="nada" meta $id="citrix-stonith-meta_attributes"
> group pgpool-ha-group virtual_ip pgpool-ha meta target-role="started"
> clone stone-citrix citrix-stonith meta target-role="started"
> property $id="cib-bootstrap-options" expected-quorum-votes="2" no- 
> quorum-policy="ignore" stonith-timeout="30s" default-action- 
> timeout="30s" cluster-delay="30s"
> rsc_defaults $id="rsc_defaults-options" resource-stickiness="INFINITY"
> commit
> EOF

Just to note that this turned out to be shell expanding $id in
the here document.

> OUTPUT:
> element nvpair: Relax-NG validity error : Expecting element op, got  
> nvpair
> Relax-NG validity error : Extra element operations in interleave
> element operations: Relax-NG validity error : Element primitive failed  
> to validate content
> element group: Relax-NG validity error : Invalid sequence in interleave
> element group: Relax-NG validity error : Element group failed to  
> validate content
> element cib: Relax-NG validity error : Element cib failed to validate  
> content
> crm_verify[3180]: 2009/07/08_02:02:08 ERROR: main: CIB did not pass  
> DTD/schema validation
> Errors found during check: config not valid
> WARNING: 10: crm_verify(8) found errors in the CIB
> INFO: 10: use commit force if you know what you are doing
> Call cib_modify failed (-47): Update does not conform to the  
> configured schema/DTD

crm shell needs better syntax checking here.

Thanks,

Dejan

> <null>
> _______________________________________________
> Linux-HA mailing list
> Linux-HA at lists.linux-ha.org
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems