[Linux-HA] confused about setting drac5 stonith

[Andrew Beekhof]

On Nov 20, 2007, at 11:48 AM, Frank wrote:

> Hi,
> I've seen some discussions about this, but I'm still confused.
> I'm using the drac5 stonith plugin from Thomas Paschy (thanks  
> thomas)  but I don't  know how to cofigure it to work fine.
>
> We have a cluster with 2 nodes, each one with its public address,  
> and each one with a drac5 device with a private address;
> le'ts call them node1, node2, node1_drac and node2_drac. So node1  
> can make a reset to node2 connenting to node2_drac,
> and node2 can make a reset to node1 connenting to node1_drac
>
> So we have created two stonith resources called stonith_node1_drac  
> (with node1_drac address) and stonith_node2_drac (with
> node2_drac address); stonith_node1_drac needs to run on node node2  
> because it is node2 which can reboot node1, an stonith_node2_drac
> needs to run on node node1 because it is node1 which can reboot node2
>
> If we started this way, they starts ok. But when we forced a stonith  
> condition on node2 (killing heartbeat) node 1 is not able to reset  
> node2; we got
> this on logs:
>
> pengine[8955]: 2007/11/20_11:05:05 WARN: stage6: Scheduling Node  
> kripton for STONITH
> pengine[8955]: 2007/11/20_11:05:05 info: native_stop_constraints:  
> drac_argon_stop_0 is implicit after kripton is fenced
> pengine[8955]: 2007/11/20_11:05:05 WARN: process_pe_message:  
> Transition 80: WARNINGs found during PE processing. PEngine Input  
> stored in: /var/lib/heartbeat/pengine/pe-warn-75.bz2
> pengine[8955]: 2007/11/20_11:05:05 info: process_pe_message:  
> Configuration WARNINGs found during PE processing.  Please run  
> "crm_verify -L" to identify issues.
> stonithd[3978]: 2007/11/20_11:05:35 ERROR: Failed to STONITH the  
> node kripton: optype=RESET, op_result=TIMEOUT
> tengine[8954]: 2007/11/20_11:05:35 info: tengine_stonith_callback:  
> call=-43, optype=1, node_name=kripton, result=2, node_list=,  
> action=8:80:84a50e41-ffda-4c9a-959a-76a61919413a
> tengine[8954]: 2007/11/20_11:05:35 ERROR: tengine_stonith_callback:  
> Stonith of kripton failed (2)... aborting transition.
>
> (kripton is node2 and argon is node1)
> It seems that there is something messy with the addresses.
> Can anyone help?

not without logs, configurations and the version your using

>
>
> Thanks.
>
> Frank
> UPC - Barcelona -Spain
>
> -- 
> Aquest missatge ha estat analitzat per MailScanner
> a la cerca de virus i d'altres continguts perillosos,
> i es considera que està net.
> For all your IT requirements visit: http://www.transtec.co.uk
>
> _______________________________________________
> Linux-HA mailing list
> Linux-HA at lists.linux-ha.org
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems