[Linux-HA] A problem in one node(DC node)

[Andrew Beekhof]

On 5/16/07, YAMAUCHI HIDEO <renayama19661014 at ybb.ne.jp> wrote:
> Sorry..the explanation was insufficient.
>
> >> 1.When a problem happens in pengine/tengine after resource
> >> start in one node, pengine/tengine does not restart.
> >> (example. -9 pengine or tengine)
>
> >are you saying that if you kill the TE or PE, that it does not get
> restarted?
> >does it get started on the other node instead?
>
> It started only by one node though the composition of two nodes.
> In this case, it is not reactivated.
> It stops in the state of S_TERMINATE at this time.
> Moreover, the process of other heartbeat remains starting.

ok, i believe i fixed something like this recently.
is there any chance you could grab
http://hg.linux-ha.org/dev/archive/SLE10-SP1.tar.bz2 and re-test?

> >> 2.When a problem happens in crmd after resource start in
> >> one node, a monitor of a resource stops after restart.
> >> (example.kill -9 crmd)
>
> >i dont understand the question
>
> Sorry..
> Only the node of composition 1 of two nodes started here.
> After it starts by one node, the resource and the monitor are begun.
> However, the monitor stops though the resource remains being begun when crmd
> is killed.

I believe you're talking about:
   http://old.linux-foundation.org/developer_bugzilla/show_bug.cgi?id=1575

>
> Regards,
> Yamauchi
>
> -----Original Message-----
> From: linux-ha-bounces at lists.linux-ha.org
> [mailto:linux-ha-bounces at lists.linux-ha.org]On Behalf Of Andrew Beekhof
> Sent: Tuesday, May 15, 2007 6:21 PM
> To: General Linux-HA mailing list
> Subject: Re: [Linux-HA] A problem in one node(DC node)
>
>
> On 5/14/07, $B;3Fb(B $B1Q at 8(B <renayama19661014 at ybb.ne.jp> wrote:
> > Hi
> >
> > When a problem happened for a process of Heartbeat, will
> > this action be right?
> >
> > 1.When a problem happens in pengine/tengine after resource
> > start in one node, pengine/tengine does not restart.
> > (example. -9 pengine or tengine)
>
> are you saying that if you kill the TE or PE, that it does not get
> restarted?
> does it get started on the other node instead?
>
> > 2.When a problem happens in crmd after resource start in
> > one node, a monitor of a resource stops after restart.
> > (example.kill -9 crmd)
>
> i dont understand the question
>
>
> > (configuration)
> > Heartbeat ver2.0.8
> > node      2node(Active/standby)
> > Resource  IPaddr/ocf
> > crm       yes
> >
> > Regards,
> > Yamauchi.
> > _______________________________________________
> > Linux-HA mailing list
> > Linux-HA at lists.linux-ha.org
> > http://lists.linux-ha.org/mailman/listinfo/linux-ha
> > See also: http://linux-ha.org/ReportingProblems
> >
> _______________________________________________
> Linux-HA mailing list
> Linux-HA at lists.linux-ha.org
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems
>
> _______________________________________________
> Linux-HA mailing list
> Linux-HA at lists.linux-ha.org
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems
>