[Linux-HA] BasicSanityCheck - heartbeat-2.1.1/heartbeat-2.1.2 - fails IPaddr2 tests

[Michael Kapp]

Andrew Beekhof wrote:
> On 7/31/07, Michael Kapp <michael.kapp at avira.com> wrote:
>> Andrew Beekhof wrote:
>>> On 7/31/07, Michael Kapp <michael.kapp at avira.com> wrote:
>>>> Andrew Beekhof wrote:
>>>>> On 7/31/07, Michael Kapp <michael.kapp at avira.com> wrote:
>>>>>> Same with heartbeat-2.1.2 but gave me one error less:
>>>>>> (IPaddr2 used as RA in cib.xml seems to be working.)
>>>>>>
>>>>>> BasicSanityCheck
>>>>>> ================
>>>>>>
>>>>>> stdout:
>>>>>> =======
>>>>>>
>>>>>> ...
>>>>>> ERROR: IPaddr2 RA failed
>>>>>> OOPS! Looks like we had some errors come up.
>>>>>> 1 errors. Log file is stored in /tmp/linux-ha.testlog
>>>>>> ...
>>>>>>
>>>>>> set -x
>>>>>> ======
>>>>>>
>>>>>> ...
>>>>>> Testing RA: IPaddr2
>>>>>> + /usr/sbin/ocf-tester -o ip=127.0.0.20 -o netmask=32 -n DemoIPaddr2
>>>>>> /usr/lib/ocf/resource.d//heartbeat/IPaddr2
>>>>>> + rc=1
>>>>>> + '[' 1 -ne 0 ']'
>>>>>> + echo 'ERROR: IPaddr2 RA failed'
>>>>>> ...
>>>>>>
>>>>>> logfile
>>>>>> =======
>>>>>>
>>>>>> ...
>>>>>> Testing RA: IPaddr2
>>>>>> Beginning tests for /usr/lib/ocf/resource.d//heartbeat/IPaddr2...
>>>>>> * rc=5: Validation failed.  Did you supply enough options with -o ?
>>>>>> Aborting tests
>>>>>> ERROR: IPaddr2 RA failed
>>>>>> ...
>>>>> I just tried the latest version too and it seemed to work.
>>>>> I've had trouble in the past if no default route was present... what
>>>>> does your routing table look like?
>>>> With heartbeat-2.0.8 - BasicSanityCheck had no problems with this setup:
>>> its a test that was introduced long after 2.0.8
>>>
>>>> 10.90.1.0/24 dev eth1  proto kernel  scope link  src 10.90.1.51
>>>> 192.168.19.0/24 dev eth0  proto kernel  scope link  src 192.168.19.11
>>>> 127.0.0.0/8 dev lo  scope link
>>>> default via 10.90.1.252 dev eth1
>>>>
>>>> 1: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
>>>>     link/ether 00:04:75:ab:a2:49 brd ff:ff:ff:ff:ff:ff
>>>>     inet 192.168.19.11/24 brd 192.168.19.255 scope global eth0
>>>> 2: eth1: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
>>>>     link/ether 00:0f:1f:e2:12:66 brd ff:ff:ff:ff:ff:ff
>>>>     inet 10.90.1.51/24 brd 10.90.1.255 scope global eth1
>>>>     inet 10.90.1.50/24 brd 10.90.1.255 scope global secondary eth1:0
>>>> 3: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
>>>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>>>     inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
>>>>
>>>> 10.90.1.50 - cluster IP alias
>>>> 192.168.19.0 - heartbeat/drbd net
>>> looks sane enough.
>>>
>>> can you try running it manually (as root):
>>>
>>> OCF_ROOT=/usr/lib/ocf /usr/sbin/ocf-tester -o ip=127.0.0.20 -o
>>> netmask=32 -n DemoIPaddr2 /usr/lib/ocf/resource.d//heartbeat/IPaddr2
>>>
>>> even better, could you add "set -x" to the IPaddr2 script first?
>> $> OCF_ROOT=/usr/lib/ocf /usr/sbin/ocf-tester -o ip=127.0.0.20 -o
>> netmask=32 -n DemoIPaddr2 /usr/lib/ocf/resource.d//heartbeat/IPaddr2
>> Beginning tests for /usr/lib/ocf/resource.d//heartbeat/IPaddr2...
>> * rc=5: Validation failed.  Did you supply enough options with -o ?
>> Aborting tests
>>
>> btw, set -x in the IPaddr2 script did not changed the output above.
> 
> 
> hmm, maybe you need to pass  -v to ocf-tester to get the output

Yes, thanks Andrew - that's it! ;-)

...
+ Echo 'IPaddr2[11328]: 2007/07/31_15:40:27' 'ERROR: Setup problem:
Couldn'\''t find utility iptables'
+ echo 'IPaddr2[11328]: 2007/07/31_15:40:27' 'ERROR: Setup problem:
Couldn'\''t find utility iptables'
+ exit 5
* rc=5: Validation failed.  Did you supply enough options with -o ?
...

Iptables was not installed!

Now, can you explain me, why iptables is needed for the IPaddr2 ocf
resource script?

Cheers,
Michael

-- 

Yours sincerely

Michael Kapp, Projectmanager IT - Avira GmbH
Phone (general office):      +49 (0) 7542-500 0
Phone (service department):  +49 (0) 7542-500 700
Fax:                         +49 (0) 7542-500 724

Avira GmbH
Lindauer Str. 21, D-88069 Tettnang, Germany
CEO: Tjark Auerbach; AG Ulm HRB 630992

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: OpenPGP digital signature
Url : http://lists.community.tummy.com/pipermail/linux-ha/attachments/20070731/1e29b745/signature.pgp