[Linux-HA] Problem of check on number of nodes

[YAMAUCHI HIDEO]

Hi

A log and an configuration file were appended.

The output error log becomes the following.
----------------------------------------
heartbeat[3002]: 2007/07/03_11:28:13 ERROR: process_status_message: bad node
[192.168.40.1] in message
heartbeat[3002]: 2007/07/03_11:28:13 ERROR: MSG: Dumping message with 6
fields
heartbeat[3002]: 2007/07/03_11:28:13 ERROR: MSG[0] : [t=NS_st]
heartbeat[3002]: 2007/07/03_11:28:13 ERROR: MSG[1] : [st=ping]
heartbeat[3002]: 2007/07/03_11:28:13 ERROR: MSG[2] : [info=ping]
heartbeat[3002]: 2007/07/03_11:28:13 ERROR: MSG[3] : [src=192.168.40.1]
heartbeat[3002]: 2007/07/03_11:28:13 ERROR: MSG[4] : [ts=4689b43b]
heartbeat[3002]: 2007/07/03_11:28:13 ERROR: MSG[5] : [auth=2
7fc72b41da381e8a388d289eeaec25c4]
----------------------------------------------------------------------

When starting, it becomes an error when it sets more than 100 nodes.
I think that I should similarly become a start error in this case.

Moreover, the development version(Heartbeat-Dev-94d9a8c98f92.tar.gz) was the
same result though confirmed.

The registration of bugzilla becomes tomorrow.

Regard,
 Yamauchi


> -----Original Message-----
> From: linux-ha-bounces at lists.linux-ha.org
> [mailto:linux-ha-bounces at lists.linux-ha.org]On Behalf Of YAMAUCHI HIDEO
> Sent: Sunday, July 01, 2007 9:20 AM
> To: General Linux-HA mailing list
> Subject: RE: [Linux-HA] Problem of check on number of nodes
>
>
> Sorry....
>
> I wanted to confirm it concerning the number of nodes that was able to be
> treated.
> When confirming it, this problem was found by chance.
>
> Regard,
>  Yamauchi.
>
> > -----Original Message-----
> > From: linux-ha-bounces at lists.linux-ha.org
> > [mailto:linux-ha-bounces at lists.linux-ha.org]On Behalf Of Lars
> > Marowsky-Bree
> > Sent: Sunday, July 01, 2007 3:15 AM
> > To: General Linux-HA mailing list
> > Subject: Re: [Linux-HA] Problem of check on number of nodes
> >
> >
> > On 2007-06-30T06:14:35, YAMAUCHI HIDEO
> <renayama19661014 at ybb.ne.jp> wrote:
> >
> > > I confirmed the maximum checks of the number of nodes.
> > > It is not thought that it uses it by never 100 nodes.
> >
> > I apologize, but I do not understand what you wrote.
> >
> > Do you mean to say that you wanted to test the maximum node size, but
> > that you never intend to run 100 nodes in practice?
> >
> > If so, what node count are you interested in?
> >
> >
> > Regards,
> >     Lars
> >
> > --
> > Teamlead Kernel, SuSE Labs, Research and Development
> > SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg)
> > "Experience is the name everyone gives to their mistakes." --
> Oscar Wilde
> >
> > _______________________________________________
> > Linux-HA mailing list
> > Linux-HA at lists.linux-ha.org
> > http://lists.linux-ha.org/mailman/listinfo/linux-ha
> > See also: http://linux-ha.org/ReportingProblems
> >
>
> _______________________________________________
> Linux-HA mailing list
> Linux-HA at lists.linux-ha.org
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cib.xml
Type: text/xml
Size: 5185 bytes
Desc: not available
Url : http://lists.community.tummy.com/pipermail/linux-ha/attachments/20070702/26f5ffb2/cib-0001.bin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ha.cf
Type: application/octet-stream
Size: 1465 bytes
Desc: not available
Url : http://lists.community.tummy.com/pipermail/linux-ha/attachments/20070702/26f5ffb2/ha-0001.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ha-log
Type: application/octet-stream
Size: 23268 bytes
Desc: not available
Url : http://lists.community.tummy.com/pipermail/linux-ha/attachments/20070702/26f5ffb2/ha-log-0001.obj