[Linux-HA] Learning the CIB

[maike]

desculpe cara mandei o CIB.XML errado


2007/1/10, vini.bill at gmail.com <vini.bill at gmail.com>:
> Ok, ok... Now I think I know where is my problem...
>
> I'd like to know how should I specify my ip, nic and broadcast parameters
> for my IPaddr primitive. Any tips?
>
> Vinicius Menezes
>
> On 1/10/07, vini.bill at gmail.com <vini.bill at gmail.com> wrote:
> >
> > Ok... I followed the tips you gave me and I'm still get some errors. Take
> > a look at my /var/log/messages:
> >
> > Jan 10 11:59:25 DB01 heartbeat: [4788]: WARN: Late heartbeat: Node db01:
> > interval 1000 ms
> > Jan 10 11:59:25 DB01 heartbeat: [4788]: WARN: Late heartbeat: Node
> > 192.168.0.1: interval 1000 ms
> > Jan 10 11:59:25 DB01 heartbeat: [4788]: WARN: Late heartbeat: Node db02:
> > interval 1000 ms
> > Jan 10 11:59:25 DB01 crmd: [4867]: debug:
> > init_client_ipc_comms_nodispatch: ipc.c Could not init comms on:
> > /var/run/heartbeat/crm/cib_rw
> > Jan 10 11:59:25 DB01 crmd: [4867]: debug: cib_native_signon:cib_native.c
> > Connection to command channel failed
> > Jan 10 11:59:25 DB01 crmd: [4867]: WARN: cib_native_signon:cib_native.c
> > Connection to CIB failed: connection failed
> > Jan 10 11:59:25 DB01 crmd: [4867]: debug: cib_native_signoff:cib_native.c
> > Signing out of the CIB Service
> > Jan 10 11:59:25 DB01 crmd: [4867]: debug: do_cib_control:cib.c Could not
> > connect to the CIB service
> > Jan 10 11:59:25 DB01 crmd: [4867]: WARN: do_cib_control: cib.c Couldn't
> > complete CIB registration 25 times... pause and retry
> > Jan 10 11:59:25 DB01 crmd: [4867]: debug: crm_timer_start:utils.c Started
> > Wait Timer (I_NULL:500ms), src=30
> > Jan 10 11:59:25 DB01 crmd: [4867]: debug: register_fsa_input_adv:
> > messages.c Stalling the FSA pending further input: cause=C_FSA_INTERNAL
> > Jan 10 11:59:25 DB01 crmd: [4867]: debug: s_crmd_fsa:fsa.c Exiting the
> > FSA: queue=0, fsa_actions=0x180021000000006, stalled=true
> >
> > the cib I'm using is the one attached and the ha.cf is also attached. I'm
> > completely lost now. All the cib.xml seem to be well done but I still
> > can't get the virtual IP up.
> >
> > I'm investigating what's wrong here. Any ideas or suggestions are welcome.
> >
> >
> > Vinicius Menezes
> >
> > On 1/10/07, John Hearns <john.hearns at streamline-computing.com> wrote:
> > >
> > > vini.bill at gmail.com wrote:
> > > > Well It's a 10 Gigabit connection so... I tought I could try 100ms,
> > > but
> > > > anyway. I'll That tomorrow ;).
> > >
> > > You are confusing bandwidth and latency.
> > > Sticking a wet finger in the air, you might get 80ms latency on a
> > > standard gigabit connection when passing MPI traffic, using a good
> > > switch.
> > > Using specially tuned drivers, we get down to 20ms which allows us to
> > > build some highly cost effective and efficient gigabit Beowulf clusters.
> > >
> > > Don't know about standard 10Gbps,
> > > but if you're looking for low latency at 10Gbps Myrinet have a new line
> > > of NICs
> > > http://www.myricom.com/Myri-10G/overview/
> > >
> > > But in short, stick with the 1 second recommendation.
> > >
> > >
> > >
> > > --
> > >       John Hearns
> > >       Senior HPC Engineer
> > >       Streamline Computing,
> > >       The Innovation Centre, Warwick Technology Park,
> > >       Gallows Hill, Warwick CV34 6UW
> > >       Office: 01926 623130 Mobile: 07841 231235
> > > _______________________________________________
> > > Linux-HA mailing list
> > > Linux-HA at lists.linux-ha.org
> > > http://lists.linux-ha.org/mailman/listinfo/linux-ha
> > > See also: http://linux-ha.org/ReportingProblems
> > >
> >
> >
> >
> > --
> > ... Vinicius Menezes ...
> >
>
>
>
> --
> ... Vinicius Menezes ...
> _______________________________________________
> Linux-HA mailing list
> Linux-HA at lists.linux-ha.org
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cib.xml.certo
Type: application/octet-stream
Size: 3114 bytes
Desc: not available
Url : http://lists.community.tummy.com/pipermail/linux-ha/attachments/20070110/b00ce6af/cib.xml.obj