[Linux-HA] Re: Problem with apcmastersnmp (AP7920)

[Zachacker, Maik]

Dave Blaschke wrote:
>Can you see in the logs where this power-on is coming from?  I did not 
>see anything in your previous post (Aug 4) that showed this...

I get the following output.

>Aug  4 12:54:28 cluserver1 tengine: [4274]: info:
te_fence_node:actions.c
> Executing reboot fencing operation (39) on cluserver2 (timeout=2500)
>Aug  4 12:54:28 cluserver1 stonithd: [17845]: info: client tengine
[pid:
> 4274] want a STONITH operation RESET to node cluserver2.
>Aug  4 12:54:28 cluserver1 stonithd: [17845]: info:
> stonith_operate_locally::2289: sending fencing op (1) for cluserver2
to
> device apcmastersnmp (rsc_id=DoFencing:1, pid=6289)
>Aug  4 12:54:29 cluserver1 stonithd: [6289]: CRIT:
apcmastersnmp_reset_req: 
> no active outlet for 'cluserver2'.
>Aug  4 12:54:29 cluserver1 stonithd: [17845]: info: Failed to STONITH
node 
> cluserver2 with one local device, exitcode = 4. Will try to use the
next 
> local device.
>Aug  4 12:54:31 cluserver1 stonithd: [17845]: info: Failed to STONITH
the 
> node cluserver2: optype=1, op_result=2
>Aug  4 12:54:31 cluserver1 tengine: [4274]: info: 
> tengine_stonith_callback:callbacks.c call=6289, optype=1, 
> node_name=cluserver2, result=2, node_list=,
action=39;17:a88bfed0-2320-
> 4fbc-8e68-9b290bd10279
>Aug  4 12:54:31 cluserver1 tengine: [4274]: ERROR: 
> tengine_stonith_callback:callbacks.c Stonith of cluserver2 failed
(2)... 
> aborting transition.

A reboot or reset will be done, so the poweron should be ok. The problem
is that the stonithd does not recognize that the poweroff was successful
and tries again to poweroff.

--
Maik Zachacker
IBH Prof. Dr. Horn GmbH, Dresden, Germany