[Linux-HA] Re: heartbeat 2.0.2 RPMS for RHEL4

Ethan Chai ethan at md.com.my
Thu Oct 13 22:39:23 MDT 2005


Scott Farwell wrote:
> I have found that the easiest way to build and install the Heartbeat 
> v2.0.2 RPMS
> from source on a Redhat Enterprise Linux 4 machine is to perform the 
> following steps :
> 
> Note :  This does build the ldirectord rpm, but to install it there are 
> several more packages that are needed to solve it's
> dependencies.  I haven't used it so far mainly for that reason alone.
> 
> 1.   Download "libnet-1.1.2.1-1.rh.el.um.1.src.rpm" from the ultramonkey 
> site at  :
> 
>                     
> http://www.ultramonkey.org/download/3/rh.el.3/SRPMS/libnet-1.1.2.1-1.rh.el.um.1.src.rpm 
> 
> 
> 2.   Download "heartbeat-2.0.2-1.src.rpm" from the linux-ha.org site at :
> 
>                     http://linux-ha.org/download/heartbeat-2.0.2-1.src.rpm
> 
> 
> 3.  Rebuild and install both libnet and heartbeat for your specific 
> machine configuration using the following script : (or commands)
> ======================================================================================= 
> echo "Beginning Heartbeat installation"echo 
> "--------------------------------"echo ""echo "Uninstalling any old 
> versions of heartbeat"rpm -e heartbeat-debuginforpm -e heartbeatrpm -e 
> heartbeat-stonithrpm -e heartbeat-pilsecho "Rebuilding the required 
> libnet RPM for your OS from the source RPM"rpmbuild --quiet --rebuild 
> libnet-1.1.2.1-1.rh.el.um.1.src.rpmecho "Installing the required libnet 
> rpm"rpm -Uhv /usr/src/redhat/RPMS/i386/libnet-1.1.2.1-1*.rpmecho 
> "...................................................Done"echo "" echo 
> "Rebuilding the Heartbeat RPMS for your OS from the source RPM"rpmbuild 
> --quiet --rebuild heartbeat-2.0.2-1.src.rpmecho 
> "...................................................Done"echo "" echo 
> "Installing the Heartbeat RPMS"rpm -Uhv 
> /usr/src/redhat/RPMS/i386/heartbeat-pils-2.0.2-1.i386.rpmrpm -Uhv 
> /usr/src/redhat/RPMS/i386/heartbeat-stonith-2.0.2-1.i386.rpmrpm -Uhv 
> /usr/src
> /redhat/RPMS/i386/heartbeat-2.0.2-1.i386.rpmrpm -Uhv 
> /usr/src/redhat/RPMS/i386/heartbeat-debuginfo-2.0.2-1.i386.rpmecho 
> "...................................................Done"echo ""echo 
> "Copying the original Heartbeat sample config files into place"cp 
> /usr/share/doc/heartbeat-2.0.2/ha.cf    /etc/ha.d/ha.cf.samplecp 
> /usr/share/doc/heartbeat-2.0.2/haresources/etc/ha.d/haresources.samplecp 
> /usr/share/doc/heartbeat-2.0.2/authkeys    /etc/ha.d/authkeys.sampleecho 
> "...................................................Done"echo ""echo 
> "You must now create the /etc/ha.d/ha.cf, /etc/ha.d/haresources, 
> and"echo "/etc/ha.d/authkeys files using the sample files provided to 
> setup a"echo "2 node HA cluster or build a properly formatted "echo 
> "/var/lib/heartbeat/crm/cib.xml configuration file to setup 
> amultinode"echo "cluster using CRM."chkconfig --level 2345 heartbeat on 
> echo "Installation of Heartbeat v2.0.2 is complete." 
> ==================================================================
> =====================
> 
> _______________________________________________
> Linux-HA mailing list
> Linux-HA at lists.linux-ha.org
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems

the format installation guide gone.:)

thanks Scott Farwell for the guide , will test it soon and feedback on it

-- 
Ethan Chai
Linux system Engineer
My Directory Sdn. Bhd.

*********************************************
*    *POWERED BY BYNARI INSIGHT SERVER*     *
*  The Enterprise Email Server That Rocks!  *
*********************************************




More information about the Linux-HA mailing list